Our new Hunting Series of mounts – offering a more attractive and lightweight alternative to the ISMS series of scope mounts.
Please see our other listings for the Hunter Aesthetic mounts which features two classic rings without interfaces on either for a more traditional look.
The Spuhr® Hunting Series of mounts features the diagonally cut rings of the Spuhr® Ideal Scope Mount System (ISMS™, US Patent 8,733,011) and implements them into a lightweight and aesthetically more pleasing mounting solution for the hunting market.
The mounts are machined from billet 7000 series aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance and come pre-waxed from the factory to ensure proper torque values. Furthermore, the SCP-series of Hunting Mounts can be installed for either right-handed or left-handed use and feature two separate side clamps.. The mount is shipped with a manual and a “wedge” leveling key.
Designed for use on Picatinny rails and features two interface rings, which can be rotated as to position the interface/accessory in either the 12-o’clock or 3-o’clock position.
Made in Sweden
Features
Durability
Prevents damage on scope due to flexing during heavy recoil or rough environment. Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together of small parts.
Accessible and readable dials
The rings are cut 45 degrees instead of horizontal as usual, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs.
Accessories
Possibility of using various accessories such as angle cosine indicator, back up sights, lasers, illuminators, Night vision mounts etc. With traditional mounts this can be achieved only if there is sufficient space on the middle tube for additional rings, which there rarely is. The hunting series has one mounting position on one ring half. A selection of interfaces for popular accessories are available.
NOTE: These will not fit the SAKO S20 or rifles with 2-piece rails.
Available variants:
Heights are measured from the centre of the scope tube to the top of the picatinny rail.
- SCP-3000D, 30mm Tube, 1″ Height, 0 MIL/0 MOA
- SCP-3001D, 30mm Tube, 1.18″ Height, 0 MIL/0 MOA
- SCP-3006D, 30mm Tube, 1.35″ Height, 0 MIL/0 MOA
- SCP-3022D, 30mm Tube, 1.5″ Height, 70mm Cantilever, 0 MIL/0 MOA
- SCP-4001D, 34mm Tube, 1.18″ Height, 0 MIL/0 MO
- SCP-4006D, 34mm Tube, 1.35″ Height, 0 MIL/0 MOA
ATP is an authorised Australian dealer for Spuhr. All Spuhr products bought from ATP are covered by the Australian Spuhr Warranty.
