EGW HD Heavy Duty Tactical Picatinny Weaver Scope Mount Rail Base – Tikka / Sako

To fit Sako and Tikka firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002″.

• This mount is available with a 0 or 20 MOA (for most models) 
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 
• Made in the USA
• 7075 T6 Aircraft grade aluminium for most rails
• Black models are Type 3 hard coat anodized

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

NOTE: If you prefer to buy Australian Made, we also manufacture our own scope rails for the Tikka T1x, Tikka M55 and Tikka T3/T3x. Available at the following link: https://australiantacticalprecision.com.au/shop/optics/scope-bases-and-rails/?filtering=1&filter_product_brand=1705

 

Notes:

SAKO TRG, M995 RAILS: These are not dovetail scope mounts. Your gun must be drilled and tapped for this scope mount to work. This scope mount comes with Hex Head Metric 3.5 X .6 screws.

TIKKA T3 & T3X RAILS: Tikka T3 rifles made after 2003 use 6-48 screws. Guns before 2003 use 3.5 x .5 metric screws. We only provide the 6-48 screw variant.

TIKKA T3X TAC A1 RAILS: This mount is made specifically for the Tikka T3x Tac A1.

TIKKA T1X RAILS: These are for right handed rifles only.

There is a screw in the front of the original mount that is located underneath the front end. The front end of the stock must be removed and then this screw must also be removed before the original mount can be removed.

Removing the original mount may be a difficult task. Please use caution when removing the original mount and when installing our mount.

Available for the following:

*The center spread is the distance between the two middle holes, center to center, on your receiver.

#80500: Tikka T3 and T3X Rifle variants. (provided with standard 6-48 screws, as Tikkas produced after 2003 are drilled and tapped for 6-48 screws) – HD – 0 MOA – Black (Center Spread: 3.245″)

#80502: Tikka T3 and T3X Rifle variants. (provided with standard 6-48 screws, as Tikkas produced after 2003 are drilled and tapped for 6-48 screws) – HD – 20 MOA – Black (Center Spread: 3.245″)

#80512: Tikka T3X TAC A1 – HD – 20 MOA – Black (Center Spread: 3.245″)

#80513: Tikka T3X TAC A1 – HD – 30 MOA – Black (Center Spread: 3.245″)

#80520: Tikka T1X – HD – 0 MOA – Black (Center Spread: 2.508″)

#80522: Tikka T1X – HD – 20 MOA – Black (Center Spread: 2.508″)

#80523: Tikka T1X – HD – 30 MOA – Black (Center Spread: 2.508″)

#80524: Tikka T1X – HD – 40 MOA – Black (Center Spread: 2.508″)

#81030: Sako TRG, M995 – HD – 0 MOA – Black (Center Spread: 2.574″)

#81032: Sako TRG, M995 – HD – 20 MOA – Black (Center Spread: 2.574″)

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.