Powa Beam PRO-11 285mm/11″ HID 70W Spotlight with Bracket #PLPRO-11HID-70

Australian Made Powa Beam PRO-11 70W HID Spotlight

This spotlight is the biggest of our range and with a 70W HID light source it is impressive. It has a 285mm (11″) diameter case with an all metal construction. It basically has the same reflector, case, bracket and quality reinforcements (with slight modifications) as the Halogen Pro-11 spotlight however it has a High Intensity Discharge (HID) globe, with the ballast completely mounted inside the case. The standard globe used in this light has a 5000K colour temperature and is 12v, 70w.

Adjustable Focus System

These spotlights are fitted with adjustable-focused reflector that makes focusing your beam so much easier. You take the case off, unscrew the lock ring, and spin your reflector until you see the beam you want. Once you have that beam set, simply screw the lock ring back on, put it back in the case and you’re set to go. No longer will you need to remove the glass and risk damaging your reflector.

Like all Powa Beam Spotlights, the Pro-11HID is hand focused for maximum performance and every part is replaceable.

This spotlight is a must have for those who want the biggest and brightest!

Precautions:

Do not touch the HID bulb, ballast and cord after turning on the system: It generates 20,000 voltage while    turned on and may cause burns or fatal accidents by electric shock, as well as shorten the lifespan of the bulb.

Do not turn on/off frequently: It will shorten the lifespan of the bulb. It may also cause the HID bulb not to turn on which is an indication that the safety circuit is activated on the ballast and it is not a fault. Wait a while then turn it back on.

If HID turns off while in use: Turn it off at the switch and wait approximately 15min then turn it on again. If the bulb returns to its normal condition then this indicates that a safety switch was activated and you can continue using the light. If there is no improvement then contact the store you purchased the light from.

Spotlight Warranty:

Powa Beam’s limited warranty guarantees that all PowaBeam brand products are to be free from defects in materials and workmanship for the period of 3 YEARS after retail purchase from an authorized dealer. Please retain proof of purchase for warranty purposes.

This guarantee excludes, but is not limited to, damages from road hazards/accidents, improper installation (including wiring) or operation, modification, unauthorized repair, misapplication or deliberate damage. It also excludes any consequential damage or inconvenience caused by failure of the product. Powa Beam’s liability is limited to the repair or replacement at Powa Beam’ discretion. No warranty exists for bulbs, globes or lens unless specified.

ATP is an authorised Australian dealer for Powa Beam. All Powa Beam products bought from ATP are covered by the Australian Powa Beam Warranty.