Long Shot Precision, Adjustable Bag Rider (ABR) Tall Rail Mounted

$519.95$569.95 inc. GST

The Adjustable Bag Rider (ABR) is made and assembled in the USA. Made out of the highest quality American aluminum, CNC made and anodized for superior wear resistance, the ABR is made to last and weighs less than a pound (most models). The custom dowels come in either hardened alloy steel or Stainless Steel and ride in linear bearings for consistent smooth operation. A custom-designed SS thumb wheel rides in two Delrin thrust washers that are known for their strength and creep resistance, this adjusts the height of the stock without the shooter having to take his or her eyes off the site picture. The ABR replaces the need for expensive, heavy, and bulky adjustable front rests and wobbly monopods. Installation is simple, quick, and you never need to remove it.

Say goodbye to the mound of the expensive and heavy equipment you take to the range. Whether you plan to go to the bench or want to take a shot in the field you are guaranteed to have previously unattainable stability and micro-adjustment with you at all times!

The Tall Rail Mounted Adjustable Bag Rider (Patented) designed to clamp to the lower picatinny rail on the MDT XRS, MRAD, MK22, M98 (newer models) and others listed below. The rear stock must look like the provided pictures. It provides the same superior functionality as the other ABRs. The ABR has about .95” of travel with the short dowels. It ships with the LSP made 2 Hole Rail Clamps and 10-32 bolts (torque to 18 inch pounds -5/32” allen wrench ). The slots in the ABR are tight. We recommend 2.25” minimum between the front of the ABR and the back of the grip so a more vertical grip is recommended.

The Rail Mounted ABR top section is the same for all. Only the dowel material type is different (standard or hardened).

The bottom section is available in two variants: V Bottom, ELR

The V bottom base is designed to fit the standard 3/8” stitch bag (2 stitch) you may already have (ABR lower measures 0.375″ at the lowest/thinnest point). The ELR Bottom is 0.850″ wide and 0.5″ tall, it is made for Protektor branded ELR bags or other bags with very low ears (ABR lower measures 0.850″ wide).  Functionality and construction are the same but the difference resides in how the shooter chooses to use it. The ELR bottom has a wider base for competitive shooting in which a rear bag is not permitted.

Direct Bolt on Applications and the Dowel Length version which will fit it.

MRAD, MK22, M98 – all use the Short Dowel

M98 – Must have a picatinny rail and not a built in monopod.

Woox Furiosa – See picture – use the Short Dowel

KRG BravoSee picture – use the Short Dowel. Picatinny rail from KRG needs to be attached.

Applications where modifications are required:

MDT XRS – use the Short Dowels (see pic – clearance into above stock is needed, you will also need the ATP Picatinny Accessory rail for the XRS Buttstock)

Seekins HITminor Dremel work required to open the lower slot for rear dowel clearance. Contact LSP for details (see picture.)


Hardened or Standard Dowels:

  • .338 and smaller calibers will use the Standard Dowels

  • .33XC and larger needs the Hardened Dowels

NOTE: Do NOT lower the rider past the dowels being level with the top of the ABR.

ATP is an authorised Australian dealer for Long Shot Precision. All Long Shot Precision products bought from ATP are covered by the Australian Long Shot Precision Warranty.

Weight 0.501 kg

Short – ELR Bottom, Short – V Bottom

Dowel Type

Hardened, Standard


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Enquiry

Shopping Cart
Scroll to Top