ATP Universal Bipod Picatinny Accessory Rails with QD (Flush Cup) Sling Mount – Australian Made

We only use quality gear at Australian Tactical Precision (ATP), this principal also extends to the products we manufacture.

The Universal Bipod Rail can be attached to your hunting or tactical style rifle stock so that you can mount your bipod, monopod, tripod, foregrip or any other picatinny accessory. Rail sections are contoured to avoid snagging. All models have an integrated QD (Flush Cup) sling mount on one end so you can attach your push button slings. The mounting screws sit below the rail surface so that all picatinny slots can be used.

We also include all the fasteners and mounting hardware that you will need to install your rail, consisting of 2 x 10-32 (3/4″ thread length) button head screws, 2 x 10-32 T-Nuts (3 prong),  2 x 10-32 serrated bottom nuts. The screw thread pitch/diameter is 10-32 so that they can be used as a direct replacement for your rifle’s sling studs. The kit also includes serrated bottom nuts for use in polymer or composite stocks. The serrated undersides lock them in position. For wooden and composite stocks, use the included T-Nuts which are installed on the barrel side of your stock. You will need a 20mm or slightly larger paddle style drill bit to install this.

These rails are made in two lengths to fit a wide range of stocks:

• The Short rail is 102mm (4″) in length and has 8 slots. It fits stocks with screw spacings of 41mm to 66mm (1.6″ to 2.6″) ie. HS Precision, Bell & Carlson, Boyds, Remington SPS Varmint.
• The Long rail is 122mm (4.8″) in length and has 10 slots. It fits stocks with screw spacings of 61mm to 91mm (2.4″ to 3.6″) ie. Bell & Carlson, Boyds, McMillan, Lithgow LA102

The underside (stock side) of these rails have 3 different configurations:

• The Flat version has a flat underside and is suitable for target style stocks
• The Tactical version has a very slight curve to the underside (100mm/4″ radius) and is suitable for tactical/varmint style stocks with a very slight curved stock
• The Hunting version has a curved underside (25mm / 1″ radius) and is suitable for hunting style stocks that have a curved stock

Our Universal Bipod Rails are made in Australia from a solid piece of Australian 6061-T6 aircraft aluminium bar stock on USA made CNC machines, and are MIL-Spec Type III hard coat anodised for the ultimate in scratch resistance.

They are made to MIL-STD-1913 and STANAG 4694 Specifications which hold tighter tolerances than rails made by other manufacturers, and come with all the screws and fasteners that you will need to install it: 2 x 10-32 (3/4″ thread length) button head screws, 2 x 10-32 T-Nuts (3 prong),  2 x 10-32 serrated bottom nuts.

Features:

• Made from 6061-T6 aircraft aluminium
• MIL-STD-1913 and STANAG 4694 Picatinny specification
• MIL-Spec (MIL-A-8625) Type III Hard Coat anodised
• Integrated QD (Flush Cup) Sling Mount on all models
• Includes screws and fasteners to fit it to your rifle
• Made in Australia

Available Variants:

• Short (8 Slot) – Flat underside
• Short (8 Slot) – Tactical underside
• Short (8 Slot) – Hunting underside
• Long (10 Slot) – Flat underside
• Long (10 Slot) – Tactical underside
• Long (10 Slot) – Hunting underside

All ATP products are covered under our lifetime warranty against manufacturing defects.