MDT 90 Degree Mount For LRA SEND iT MV3 Level And Spuhr Mounts #107203-BLK

$99.95 inc. GST

Availability: 6 in stock

SKU: 107203-BLK Category: Brand:

Compatible with the LRA Send iT MV3 (sold separately).  Positions the Send iT MV3 vertically to the side of the scope tube. The LRA S90 Bracket Allows the Send iT MV3 to be mounted directly to Spuhr’s  SP, SA, SS, and ST model ring mounts.

Attention! Some mounts may require Spuhr A-0001: Spacer 4mm. 

Included Items:

-LRA S90 Bracket
-#8-32 screw (1)
-4mm x 10mm screws (2)

**Warning**  Screw lengths MUST be checked PRIOR to attaching the mounts. In some applications the screw can “bottom out” against the scope tube or damage other components if the screw length is excessive or the wrong size/thread pitch is used. YOU are RESPONSIBLE to check the length and size of screws and verify interferences before final assembly. ATP, MDT, or LRA are not liable for damage to our products or the products they are being mounted or attached to.

Installation:

Step 1- Attach the LRA S90 to the Spuhr mount using the (2) supplied 4mm x 10mm flat head screws using either an IP20 or T20 Torx Plus or Torx drive. Torque both screws to 20-25 in-lbs.

Step 2- attach the  Send iT MV3 to the LRA S90 bracket. Follow the instructions included with the Send iT MV3 for removal of the Picatinny mount. Carefully fit the Send iT into the pocket of the LRA S90 bracket by hand and confirm it’s sitting flat and fully seated BEFORE installing the screw. Install and torque the (1) supplied  # 8-32 Flat head screw to 30-34 in-lbs using a 3/32 Allen drive.

ATP is an authorised Australian dealer for MDT. All MDT products bought from ATP are covered by the Australian MDT Warranty.

Weight 0.101 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top