EGW Handgun Pistol Mount for Vortex Razor, C-More Red Dot Sights

Simply remove the rear sight on your pistol and replace it with the EGW mount in order to mount your Vortex Razor or C-More STS, STS2, RTS2 red-dot sight.

No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

• Made in the USA
• 7075 T6 Aircraft grade aluminium
• Black models are Type 3 hard coat anodized
• Mounting screws included

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Installation: EGW recommends 15 inch lbs of torque and a drip of blue loctite.

Rear sight pusher tool recommended for installation.

This mount does not fit the Vortex Venom or Viper.

Notes:

GI 1911 49429: This mount fits: 1911s with a G.I. style rear sight cut

Novak 49430: This mount fits 1911s with Novak style rear sight cut 
CZ 75 Bull Shadow

LPA 49431: This mount fits 1911s with LPA style rear sight cut 

Glock 49432: This mount fits all generation Glocks 17 – 48

Does not fit Glock MOS models.

BOMAR 49433: This sight fits (including but not limited to): STI Edge (either this sight or LPA), Les Baer 1911 (adjustable rear sights), Colt Gold Cup Trophy with Bomar Rear Sight Cut, Colt Gold Cup National Match .45acp, Colt Gold Cup, National Match 9mm, Springfield TRP Operator, Dan Wesson Bruin (may require fitting due to the Clark cut on the top of the slide)

Kimber Fixed 49435: This mount fits: Kimber 1911’s with Fixed Rear Sights, Desert Eagle 1911G*, Desert Eagle 1911C*

This mount does not fit: Kimber Micro, Kimber Micro 9.

*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*

Kimber Adjustable 49436: This mount fits: Kimber 1911 (adjustable rear sights for windage and elevation), Ruger SR1911 (adjustable rear sights for windage and elevation

SIG SAUER 49437: THIS MOUNT DOES NOT WORK WITH ANY SIG OPTICS READY PISTOLS (P320 X-CARRY ETC.)

This mount fits (including but not limited to): Sig #8 Sights, P220, P224, P225, P225-A1, P226, P227, P228, P229, P238, P239, P245, P320, P938, SP2022, M11-A1, MK25, Bersa Thunder UC Series (9/40/45), Bersa Thunder HC Series (9/40/45), FN 509.

This mount does not fit: Sig 1911s, Any Optics Ready Sigs i.e. P226 Legion RX, P229 RX, P320 X-Carry etc., P210 Target, P365, FN 509 Tactical.

S&W REVOLVERS 49437: This mount will fit K, L, N, and X frame Smith & Wesson Revolvers.

If your revolver is not drilled and tapped this mount will not work. The best way to verify that it is/is not drilled and tapped is to open the cylinder and check the rib underneath. There should be through holes that are drilled and tapped. If there are not this mount will not work without you having the gun drilled and tapped.

RUGER REVOLVER 49439: This mount fits the following Ruger Revolvers: Blackhawk, Redhawk, GP100 (with adjustable rear sights), GP100 Match Champion.

This mount does not fit: Ruger Flattop Revolvers

RUGER AUTO 49440: This mount fits the following Ruger pistols: Ruger MK I, MK II, MK III, MK IV, P85, P89, P90-95, P97, 22/45

SPRINGFIELD XD 49442: This mount fits the following Springfield XD models: XD MOD.2 – 3″ SUB-COMPACT MODEL, XD MOD.2 – 3.3″ SUB-COMPACT MODEL, XD MOD.2 – 4″ SERVICE MODEL, XD MOD.2 – 4″ SERVICE MODEL THREADED BARREL, XD MOD.2 – 5″ TACTICAL MODEL, XD 3″ SUB-COMPACT MODEL, XD 4″ SERVICE MODEL, XD(M) 3.8″ COMPACT MODEL, XD(M) 3.8″ MODEL, XD(M) 4.5″ MODEL, XD(M) 4.5″ THREADED BARREL MODEL, XD(M) 4.5″ OSP FULL SIZE, XD-S 3.3″ MODEL, XD-E 3.3″ SINGLE STACK

It does not fit: XD(M) 5.25″ COMPETITION SERIES MODEL

Universal 0.468 RAD 49443: This mount has a bottom radius of .468″. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500″-.505″ and .8625″. This should fit barrel/receiver diameters from .936″-1.350″.

UNIVERSAL 0.670 RAD 49444: This mount has a bottom radius of .670″. There should be a slight gap at the top of the radius between the receiver and the mount when mounted.

Note that this mount is drilled for and only includes #6 screws. If your application requires #8 screws then you will need to source these screws yourself as well as have this mount drilled to suit #8 size screws.

The two spreads on this mount measure .500″-.505″ and .8625″ which should fit the receiver ring on the following guns: 

Shotgun: Mossberg 500, 590, 835, 930, 935 Pre ’97, Mossberg 500, 590, 835, 930, 935 Late (after ’97) (Requires 8-40 and Longer Screws), Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws), Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws), Browning A-Bolt 12 Gauge, Savage 210, Savage 212, Savage 220, Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws), Winchester 1300, Winchester SXP

Rifle: Remington 700, 722, 40x, Remington 783, Remington 710/770, Remington xp 100, Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws), Savage Arms Centerfire Models, Winchester 70.

S&W M&P 49445: This mount will fit: Smith & Wesson M&P Full Size, 2.0 Full Size, 22 Full Size, Compact, 2.0 Compact, SD9VE, SD40VE.

This mount does not fit: Smith & Wesson M&P Shield, Shield EZ .380, SW9VE, SW40VE, C.O.R.E Series, M&P .22 Compact.

Smith and Wesson’s rear sight dovetails are known to vary in dimensions. Our sights are made to the same tolerances. Some users may have trouble installing our plate on their slide due to the varying tolerances in your slides. Please keep this in mind when ordering. Our return policy does allow for returns of unused and undamaged parts. These mounts should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

H&K VP9, P30, P30L, P30SK, HK45, HK45C 49446: This mount fits: H&K VP9, H&K VP9SK’,H&K VP40, H&K P30, H&K P30L, H&K P30SK, H&K 45, H&K 45C

This mount is not intended for use with the optics ready version of these pistols.

This mount does not fit:
HK USP

EAA Super 49447: This mount fits:
Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight, Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight, Hunter with adjustable (LPA/Bomar style, shown above) rear sight, Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight, Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight, Match Elite with adjustable (LPA/Bomar style, shown above) rear sight, Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight, P Match with adjustable (LPA/Bomar style, shown above) rear sight, P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight, Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight, Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight

This mount does not fit:
EAA / Tanfoglio Witness with fixed rear sight
EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above

H&K USP 49448: DOES NOT FIT THE USP COMPACT. The USP Compact rear sight cut depth is .200″, The standard USP (for this rear sight cut) rear sight cut depth is .160″ 

This mount fits: USP Tactical 9mm, USP Tactical .45 ACP, USP 9mm, USP 40 S&W, USP .45 ACP.

FN, FNS, FNX 49449: This mount does not fit the FN Five-seveN (5.7)

Does NOT Fit: USP Expert, USP Elite.

DESERT EAGLE (PRE 2017) 49450: Please take note of the Pre 2017 and Post 2017 differences before placing your order: Pre 2017 rear shelf behind the dovetail is .187″. Post 2017 rear shelf behind the dovetail is .120″

Walther 22 49451: This mount fits:
This mount is for a Colt Rail Gun 1911 .22lr that has the Walther slide.

LPA LOW MOUNT 49452: This mount fits: Baby Desert Eagle (Post 2006),
EAA Witness Elite Match.

CZ 75, 75 SP-01 Phantom, 85, P01, P07, P09, and PCR 49453: This mount fits: CZ 75, CZ 75 SP-01, CZ 75 SP-01 Phantom, CZ 85, CZ 97B, CZ 97D, CZ P-01, CZ PCR (there will be a gap under the front of the adapter plate), Tristar P120

This mount does not fit the CZ P-07 or CZ P-09

(Does NOT fit any of the SP-01 Shadow variants)

S&W M&P 22 COMPACT 49327: Using this mount in combination with a red dot sight will increase the weight on the slide of your firearm. This may lead to cycling issues especially in .22s.

S&W 1911 FIXED SIGHTS 49455: Will fit S&W 1911 with Fixed Rear Sights, will not fit models with adjustable rear sights.

Ruger PC Carbine 49456: This Mount Fits: Ruger PC Carbine*, Henry Golden Boy, Henry Long Ranger, Marlin 1894, Marlin 1895.

Sig P210A 49457: This mount fits: Sig P210A Target

This mount for the P210 is made specifically for the U.S. made P210s. The front of the mount will need to be cross drilled to fit each individual gun. The pin from the factory rear sight may be reused as well.

The hole dimension for the cross hole is 2.04mm. There are 2.04mm drill bits available from sites like Grainger, but you may also be able to use a 5/64″ bit to mark the hole on the mount and a 3/32″ bit to drill the hole. Sig uses a 2mm coiled spring pin to hold the original sight in place.

CZ Shadow 2 49458: CZ 75 Shadow, CZ 75 SP01 Shadow, CZ Shadow 2, Dan Wesson DWX, Dan Wesson DWX Compact

This mount does not fit:
Shadow 2 OR (Optics Ready)

DESERT EAGLE (POST 2017) 49459: Please take note of the Pre 2017 and Post 2017 differences before placing your order: Pre 2017 rear shelf behind the dovetail is .187″. Post 2017 rear shelf behind the dovetail is .120″

S&W 1911 ADJ SIGHTS 49460: Will fit S&W 1911 with Adjustable Rear Sights, will not fit models with fixed rear sights.

Walther PPQ 49461: This mount fits the following Walther models: PPQ Classic (M1), PPQ M2 (All Models), PPQ 45, PPQ 45 SD, PPQ Sub Compact, P99 (All Models), PPX (All Models), Creed, Creed 10 Round, PPS (All Models), PPS M2 (All Models).

This mount does not fit: Walther PPQ 22, PPQ Q4 Tac, Q5 Match

The PPQ sight has a hole drilled in the bottom of the dovetail to accommodate the plunger on some models of the Walthers. This plunger may also be removed from the slide if desired. 

CZ P10 C 45462: This Mount Fits: CZ P10C, CZ P10F

This Mount Does Not Fit: CZ P10C Optics Ready, CZ P10F Optics Ready

SIG 220 10mm HUNTER 49463: This mount fits: Sig P220 10mm Hunter, Sig P220 Super Match SAO, Sig P220 Match Elite (with adjustable sights).

S&W 52 49464: This mount fits: Smith & Wesson Model 52

This mount does not fit: Smith & Wesson Model 41

 

Available for the following:

#49429: GI 1911
#49430: Novak
#49431: LPA
#49432: Glock
#49433: Bomar
#49435: Kimber Fixed
#49436: Kimber Adjustable
#49437: Sig P220-P229, 320
#49438: S&W Revolver
#49439: Ruger Revolver
#49440: Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90-P95, P97)
#49442: Springfield XD
#49443: Universal Mount .468″ Radius
#49444: Universal Mount .670″ Radius
#49445: S&W M&P
#49446: H&K VP9, P30, P30L, P30SK, HK45, HK45C
#49447: EAA Super
#49448: H&K USP
#49449: FN FNS, FNX
#49450: Desert Eagle (Pre 2017)
#49451: Walther 22
#49452: LPA-Low Mount
#49453: CZ 75, Phantom, 85, P01, and PCR (Does NOT fit SP-01 Shadow variants)
#49454: S&W M&P 22 Compact
#49455: S&W 1911 Fixed
#49456: Marlin 1894, 1895, Henry H009, H010, Ruger PC Carbine
#49457: Sig P210
#49458: CZ SP-01 Shadow 1 and 2
#49459: Desert Eagle (Post 2017)
#49460: S&W 1911 Adjustable
#49461: Walther PPQ M2
#49462: CZ P-10 C
#49463: Sig P220 10MM Hunter
#49464: S&W 52

 

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.