EGW HD Heavy Duty Tactical Picatinny Scope Mount Rail Base – Mosin Nagant 91/30 #80244

To fit Mosin Nagant 91/30 firearms, please see our other listings for EGW rails to fit other manufacturers.

NOTE: This rail replaces the rear sight

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002″.

• This mount is available in 0 MOA 
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 
• Made in the USA
• 7075 T6 Aircraft grade aluminium for most rails
• Black models are Type 3 hard coat anodized

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Notes:

This rail replaces the rear sight You will need to use a scope that offers extended eye relief due to how far forward the mount sits.

Installation instructions:

Remove rear leaf sight from the housing
Keep the original pin as you will need this to install our base
Insert the tabbed side of our steel base in to the rear of the rear sight
Check for fitment on the front of the steel base
The corners and front may need to be filed down to achieve the optimal fit
Once the base sits completely in the rear housing insert the retaining pin from the original sight
Adjust the set screw to take up any play in the rail
Screw the top aluminum mount to the steel base
This mount can be put on in either direction

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.