EGW HD Heavy Duty Tactical Picatinny Weaver Scope Mount Rail Base – Winchester

To fit Winchester firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002″.

• This mount is available with a 0 or 20 MOA (for most models) 
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 
• Made in the USA
• 7075 T6 Aircraft grade aluminium for most rails
• Black models are Type 3 hard coat anodized

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Notes:

ALL RAILS: You must check your center spread before ordering to make sure this rail will fit your application before ordering as the Winchester Model 70 have had numerous action spacings over the years.

Available for the following:

#80600: Winchester Model 70 (Pre 1964) – HD – 0 MOA – Black (Center Spread: 3.805″)

#80602: Winchester Model 70 (Pre 1964) – HD – 20 MOA – Black (Center Spread: 3.805″)

#80603: Winchester Model 70 (Pre 1964) – HD – 30 MOA – Black (Center Spread: 3.805″)

#80610: Winchester Model 70 WSM Action – HD – 0 MOA – Black (Center Spread: 3.514″)

#80612: Winchester Model 70 WSM Action – HD – 20 MOA – Black (Center Spread: 3.514″)

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.