EGW Steel HD rails are made of 4140 Carbon Steel which is Mil-spec parkerized for a durable rust resistant finish.
These mounts are a customer overrun and have an integrated recoil lug.
Please see our other listings for Aluminium Sako rails.
This base sits at approximately 0.39″ high and are not recommended for use with quick disconnect rings, due to the valley down the center.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002″.
- This mount is only available in 20 MOA –for shooting 500-1000 yards
- Torx screws and wrench included
- This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
- Made in the USA
- 4140 Carbon Steel with a Mil-spec parkerized finish (Black)
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.
*The center spread is the distance between the two middle holes, center to center, on your receiver.
Sako TRG: These are not dovetail scope mounts. Your gun must be drilled and tapped for this scope mount to work.
Available for the following:
#86802: Sako A7 Long Action – Steel UD – 20 MOA (Center Spread 3.768″)
#86812: Sako TRG – Steel UD – 20 MOA
ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.