Vortex Viper (Pro) Cantilever Extended One Piece Scope Mount / Rings

Vortex Pro cantilever ring mount provides the correct height and forward placement for proper scope mounting.

Use this cantilever mount for mounting scopes onto rifles with picatinny rails. This cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement. Aluminum construction.

0 MOA so can be used in extended forward or rearward position. Great for rifles with a full length rail (ie. chassis) or long eye relief, or use rearwards for scopes with a short eye relief.

Made in the USA

The cantilever ring mount positions the telescopic sight at a height of 1.435 inches (36.45 mm) from top of the picatinny rail to center of scope tube.

• Tighten rail mount base screws to 25-35 inch pounds.
• Tighten scope ring fasteners to 15-18 inch pounds.

Heights are measured from the centre of the scope tube to the top of the picatinny rail.

Available in:

• 1″ inch Scope Tube
• 30mm Scope Tube
• 34mm Scope Tube

ATP is an authorised Australian dealer for Vortex. All Vortex products bought from ATP are covered by the Australian Vortex VIP Warranty

Our warranty is about you, not us. It’s about taking care of you after the sale.

The VIP stands for a Very Important Promise to you, our customers. We will repair or replace your Vortex product in the event it becomes damaged or defective—at no charge to you other then return post from you to us. It doesn’t matter how it happened, whose fault it was, or where you purchased it. You can count on the VIP Warranty for all riflescopes, red dots, rangefinders, binoculars, spotting scopes and monoculars.

• Unlimited Lifetime Warranty
• Fully transferable
• No warranty card to fill out
• No receipt needed to hang on to

If you ever have a problem, no matter the cause, we promise to take care of you.
The VIP warranty does not cover loss, misuse, theft or deliberate damage to the product.