MDT’s Skeleton Rifle Stocks V5 are designed to increase your performance and comfort by enhancing adjustment possibilities to suit your preferred shooting position. These adjustments can now be done without any tools since the set screws have been replaced by thumbwheels. The SRS V5 buttstocks are machined from 6061-T6 aluminum, then painted with a Cerakote coating. They come in two different models to match MDT’s different chassis systems and both models feature an integrated “bolt cut-out” in the cheek rest to allow for easy removal of the bolt.
The MDT Skeleton Rifle Stock V5 is now available in two different lengths (Standard & Short) and 2 colours, Black or Flat Dark Earth (FDE).
Refer to the Length Of Pull (LOP) table below to find out how each SRS V5 / chassis system combination will affect the LOP.
The Skeleton Rifle Stock will also work with our LSS chassis (and other chassis systems designed for carbine buffer tubed buttstocks) using the MDT Carbine to Fixed stock adapter (sold separately). Will not fit semi-auto rifles.
Note: This buttstock will not fit the MDT ESS Chassis System, for this you will need the ESS Specific Skeleton Rifle Butt Stock.
Don’t forget to check out our ATP Limbsaver Recoil Pad and Adaptor for the MDT chassis/buttstocks at the following link, one of the best upgrades you can have for shooting comfort:
Buttstock accessories are also available here:
Ultimate Bag Rider:
Sling Stud mount:
3 Slot (40mm) M-LOK picatinny rail:
SPECIFICATIONS
- Fixed buttstock interface,
- Thumbwheels for tool-less adjustment of LOP & cheek rest height
- Angular adjustment of cheek rest up to 8 degrees on either side
- Integrated bolt cut-out in cheek rest
- M-Lok slot for 1.5” rail or other M-Lok accessories (Not included)
- 2 QD flush cup sling mounts on either side
- Weight:
- SRS V5 = 944 gr (2.08 lbs)
- SRS V5 Short = 952 gr (2.10 lbs)
- Hardware & Parts included:
- 1/4”-20 x 3/16” Brass Tip set screws
- 1/4”-28 x 3/4” BSHCS
- SRS Mini Buffer Tube
LENGTH OF PULL (LOP) & COMPATIBILITY CHART
| TAC21 | LSS (requires carbine to fixed adapter) | LSS-XL | HS3 | ESS | ACC | |
| SRS (Fixed) Standard | 15″-16″ | 16.6″-17.6″ | 13.5″-14.5″ | 13.5″-14.5″ | Not Compatible | Not Compatible |
| SRS (Fixed) Short | 14″-15″ | 15.75″-16.75″ | 12.5″-13.5″ | 12.5″-13.5″ | Not Compatible | Not Compatible |
VERSION IMPROVEMENTS
Version 1 to 4 – No longer available.
Version 5 – The following improvements were included in the new version of our SRS Buttstock:
- Additional adjustments possibilities
- Thumbwheels for tool-less adjustments
- Bolt cut-out in cheek rest
- 2 different lengths (SRS V5 Standard & SRS V5 Short)
COMPATIBILITY
MDT’s Skeleton Rifle Stocks V5 are compatible with various MDT chassis systems as shown in the table below (see photos). Please note, as indicated in the LOP table above, that your LOP will vary depending on which chassis system / SRS V5 combination you choose for your bolt action rifle.
AVAILABLE VARIANTS
- Standard Length, Black
- Standard Length, FDE
- Short Length, Black
- Short Length, FDE
ATP is an authorised Australian dealer for MDT. All MDT products bought from ATP are covered by the Australian MDT Warranty.
John Roche (verified owner) –
Really enhances the rifle. I have fitted it to a Tikka T3X Tact A1 and would strongly recommend that anyone considering doing the same, that you get the short version. The adapter, which is necessary, will increase the length of pull to the limit when fitted with the standard version.