Name: KRG Bravo Rifle Chassis System
Brand: KRG
SKU: 87072
Availability: InStock

Kinetic Research Group (KRG) Bravo Chassis: The Bravo provides you with the essential chassis benefits combined with conventional target/varmint ergonomics all at a modest price. If you’re looking for a perfectly balanced chassis, the Bravo is exactly what you need.

The Bravo is one of the most comfortable stocks available but that’s just the beginning. The price will make you and your wallet overjoyed.

The precisely machined bedding area will put your action in its happy place nearly like it was custom bedded in there. The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories and even other KRG chassis.

The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Of course it takes AICS mags right out of the box.

It’s light. It’s comfortable. It’s modular. It’s good looking. You will love it.

Select your rifle variant from the drop down list. SA is Short Action, LA is Long Action. RH is for Right Handed, LH is for Left Handed.

NOTE: This listing is for the Bravo Chassis and comes with 1 QD flush cup, 1 front sling stud, 3 LOP Spacers and 1 L2 Polymer Picatinny rail. Some photos show optional extras which are not included, such as the magazine, night vision hood, enclosed forend, tool-less LOP system, tool-less buttpad height system, butthook cover, or the spigot mount. (NOTE: 10/22 version does not come with QD flush cups or the 3 LOP spacers)

Magazines are available here:

https://australiantacticalprecision.com.au/shop/chassis-stocks/magazines/

M-LOK accessories are available here:

https://australiantacticalprecision.com.au/brand/australian-tactical-precision-atp/?s=m-lok&post_type=product&dgwt_wcas=1

KRG specific accessories are available here:

https://australiantacticalprecision.com.au/brand/krg/

Detailed Info

Bravo Chassis Forend:

Polymer for light weight and to eliminate heat transfer to/from the shooter’s hand.
Mounting holes at various positions will take L2 Picatinny rails, Tripod Mount, Barrier stop, etc .
M-LOK slots in sides and bottom of forend for universal accessories mounting. Note: Rem 700 Long Action variants come with a Whiskey 3 forend and does not have M-LOK slots on the bottom.
Access hole for action mounting screw, so you can remove the action without removing forend.

“Backbone”:

Full length aluminum backbone from the action to the tip of the forend
Radius bedding system which is CNC’d into aluminum for consistent contact between action and chassis.
Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s. (T3 version only)
***Remington 700 inlets are made to accommodate standard Remington factory lugs. Some wider and thicker (thickness toward muzzle) aftermarket recoil lugs will also fit (up to 0.390″). Really large ones may require inletting.***
Accepts the Whiskey-3 gen 3+ Spigot Mount.
Designed for 5 or 10 round AICS magazines (with or without binder plate in T3/T3x, with binder plate only in Rem 700 unless you have a modified action). Rimfire versions use the standard factory magazine. T3/T3x CTR version uses CTR/TRG magazines.
Barrel contours accepted: 1.25″ for 4″ in front of action face, then 1.20″ straight to end of forend. A 1.25″ straight cylinder barrel will fit but we feel that the clearance is too minimal. We recommend using no larger than a varmint contour to keep proper balance.

Trigger Guard/Mag catch:

Molded light weight trigger guard
T3 versions will accept KRG Midas 2-Stage trigger, Barnard trigger for T3 as well as factory trigger.
Rem 700 version will accept the new X-mark triggers and nearly all aftermarket triggers but some aftermarket triggers may require modifications to the trigger or chassis. (Tubb 2 stage trigger will not work nor will trigger hanger type setups)
Mag catch extender button included (polymer version), we also sell an aluminum one (sold separately)

Cheekpiece:

Infinitely adjustable within range (~1” travel).
Can be quickly removed and re-installed, uses a clamp and thumbscrew design.
Made of polymer to limit heat transfer to or away from your face.

Length of Pull (LOP):

Adjustable with spacers in 3/8″ increments with nearly 2 1/4” of adjustment range.
LOP range varies slightly between versions but is roughly 12.8” to 15” (technically even longer is possible with even more spacers). NOTE: The 10/22 variant has a shorter LOP than standard.
Bravo’s include our 1-3 LOP kit which includes 3 spacers and the hardware to mount either 1, 2, or 3 allowing a max LOP of about 14″

Buttstock:

Very strong reinforced polymer material.
Mounting points for external QD cup.
Built in thumbshelf for same-side-thumb-grip shooters.
Can be configured with a continuous angled lower surface or a “butthook” configuration
Modularity with X-ray and Whiskey-3 back ends, either of those will fit on Bravo and vice versa

Recoil Pad:

Premium KRG designed pad that is light, durable, and comfortable to shoot.
Remington 700 pattern so user can install aftermarket pre-fit pads if preferred.

Mounting features for slings, monopods, etc:

Forend has M-LOK slots on each side and bottom along with other holes for mounting KRG accessories
Buttstock has one position on each side for external QD cup (1 ea included).
Buttstock includes angled cover. A “Butthook” cover is also available (sold separately)
Harris bipod stud included on forend.
Spigot Mount can be added to front of chassis (sold separately)
Ambi QD sling plate can be mounted and provides 3 positions for QD sling or HK hook sling attachments.

Materials/Finishes:

Aluminum parts are hard anodized (Type III).
Nearly all fasteners are stainless steel, some with black oxide coating, some are without.
Steel parts are salt bath nitrided or stainless steel.
Forend and buttstock are injection molded reinforced polymer.

Weight:

Approximately 2.4-3.3 lbs w/o magazine (varies with different inlets)

Colours:

Black, Flat Dark Earth (FDE/Tan), Sako Green, Stealth Grey
Crimson Red colour is only available for the 10/22 version.
NOTE: KRG have limited colours for the following inlets: Rem 700 LA LH, Howa 1500, Savage, Ruger 10/22, Tikka T3/T3x CTR Mag Version.

Important Notes:

General:

All of our chassis take AICS magazines (unless otherwise noted) with nothing extra needed, the magazine is not included. Note: T1x, 10/22 and CZ-457 utilize their factory rimfire mags. T3/T3x CTR version uses CTR/TRG magazines.
The Bravo Chassis DOES NOT come with the Hook-Style Cover.
Actions with trigger hangers will not work without mods to the chassis, hanger, or both.
Bravo chassis come standard with a Harris stud, L2 pic rail, and a 1-3 LOP spacer kit which allows LOP up to 14″ approx, more spacers available for longer LOP.

Remington 700:

We do not guarantee the proper function of Vudoo V22 or Bergara B-14r (rimfire) magazines in our chassis. It may be necessary to install and fit our Extended Mag Catch (sold separately) for proper feeding.
The front action screw requires an extended bit (3/16 hex for Rem700). Alternatively the forend can be removed for direct access to the screw.
“Blue-printed” long action Remington 700 receivers may not fit Rem LA inlet.
Remington 700 long action chassis come with a Whiskey-3 forend and take 3.850″ (CIP) length AICS pattern magazines or 3.715″ AICS mags with included spacer. The Whiskey-3 style forend does not have M-Lok on the bottom.
Left Handed models are only available in Black

Tikka T3/T3x:

The Tikka inlet accepts T3, T3x, and CTR versions, however slight mods may be required on the trigger-guard for the T3 TAC A1 to function properly. Tikka rifles accept AICS pattern mags with the exception of the Magpul AICS polymer mags.
T3/T3x CTR version uses CTR/TRG magazines.
The front action screw requires an extended bit (5mm hex for Tikka/Howa). Alternatively the forend can be removed for direct access to the screw.
We do not offer a Tikka inlet that accepts long action (.300WM, .30-06, 7mm Rem Mag, etc…) magazines.

Howa 1500/Weatherby Vanguard

Howa 1500 receivers in .223/.556 require a small mod to the bolt stop in order to feed from AICS mags.
Only available in Black or Flat Dark Earth (FDE/Tan)

CZ 457:

The CZ-457 Bravo is not compatible with the CZ-455 or other CZ rimfire actions.

Savage Centrefire:

Available in Black only at introduction with all other colors to follow soon.
To fit short action Savage centrefire rifle (10/110 etc). Does not fit the Axis or Edge.
Due to variations in the size of AICS pattern magazines, some will fit snug and may require the magwell to be opened up.

Ruger 10/22:

Compatible with factory Ruger 10/22 as well as 10/22 (22LR) receivers from Brownells, Tactical Solutions, Volquartsen, and KIDD “Classic Slip-Fit” (with or without rear tang screw) PLEASE NOTE: SOME FITTING MAY BE REQUIRED.
Not compatible with Bergara BXR, take-down models, or receivers with a rear tang that has a bottom mounting action screw (ex: Ruger 10/22 Competition).
This version is shorter than the standard Bravo with a minimum LOP of 11″ and comes with one 3/4″ LOP spacer. The recoil pad is a thin injection moulded pad for the shorter LOP. Standard logo’d KRG buttpad is also compatible (sold separately).
10/22 version does not include QD Flush Cup or 3 LOP spacers.
Only available in Black, Flat Dark Earth (FDE/Tan), Stealth Grey, or Crimson Red.

Please contact us for all warranty claims/issues for KRG products that are purchased from us.

Weight	3.01 kg
Variant	CZ 457, RH, Howa 1500 SA, Rem 700 LA – LH, Rem 700 LA – RH, Rem 700 SA – LH, Rem 700 SA – RH, Ruger 10/22, Ruger American SA – RH, Savage SA – RH, Tikka T1x, RH, Tikka T3/T3x CTR Mags – RH, Tikka T3/T3x SA – RH
Colour	Black, Crimson Red, Flat Dark Earth (FDE/Tan), Sako Green, Stealth Grey

KRG Bravo Rifle Chassis System

Important Notes:

Related products

Mesa Tactical LEO Stock Adapter for Remington 7600 7615 870 #91250 – DISCONTINUED

Vision Rifle Chassis – Mid Section / Base / Body

MDT Forend Handguard for ESS Chassis System

MDT HNT26 Carbon Fibre Hunting Rifle Chassis System – Fixed Stock Version