Spuhr Hunting Series One Piece Unimount Scope Mount / Rings – SCP Picatinny

Hunting Series One Piece Scope Mount

SCP Picatinny Rail

Please see our other listings for the Hunter Aesthetic mounts which features two classic rings without interfaces on either for a more traditional look.

The Spuhr hunting series mount is machined from one-piece solid billet, in 7075 T651 Aluminum with no joints which can over time become a weakness in a mount.

The mount features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o’clock or 3-o’clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and features two separate side clamps.

45 degree split rings gives clear visibility of the turrets with minimal movement. 10-degree wedge included.

Made in Sweden

Features

Durability

Prevents damage on scope due to flexing during heavy recoil or rough environment.  Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together of small parts.

Accessible and readable dials

The rings are cut 45 degrees instead of horizontal as usual, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs.

Accessories

Possibility of using various accessories such as angle cosine indicator, back up sights, lasers, illuminators, Night vision mounts etc. With traditional mounts this can be achieved only if there is sufficient space on the middle tube for additional rings, which there rarely is. The hunting series has one mounting position on one ring half. A selection of interfaces for popular accessories are available.

Heights are measured from the centre of the scope tube to the top of the picatinny rail.

Available variants:

Heights are measured from the centre of the scope tube to the top of the picatinny rail.

• SCP-3000, 30mm Tube, 1.0″ Height,  0 MIL/0 MOA
• SCP-3001, 30mm Tube, 1.18″ Height,  0 MIL/0 MOA
• SCP-3006, 30mm Tube, 1.35″ Height,  0 MIL/0 MOA
• SCP-3022, 30mm Tube, 1.5″ Height, 70mm Cantilever, 0 MIL/0 MOA
• SCP-4001, 34mm Tube, 1.18″ Height,  0 MIL/0 MOA
• SCP-4006, 34mm Tube, 1.35″ Height,  0 MIL/0 MOA
• SCP-6001, 36mm Tube, 1.18″ Height,  0 MIL/0 MOA

ATP is an authorised Australian dealer for Spuhr. All Spuhr products bought from ATP are covered by the Australian Spuhr Warranty.