EGW HD Heavy Duty Tactical Picatinny Weaver Scope Mount Rail Base – Savage

To fit Savage firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002″.

• This mount is available with a 0 or 20 MOA (for most models) 
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 
• Made in the USA
• 7075 T6 Aircraft grade aluminium for most rails
• Black models are Type 3 hard coat anodized

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

NOTE: If you prefer to buy Australian Made, we also manufacture our own scope rails for the Savage 93/MkII. Available at the following link: https://australiantacticalprecision.com.au/shop/optics/scope-bases-and-rails/?filtering=1&filter_product_brand=1705

Notes:

ALL SAVAGE CENTREFIRE RAILS: Most Savage receivers are drilled from the factory for #6 screws. The diameter of #6 screws is .13″ while the diameter of #8 screws is .16″. You can measure the screw diameter in the receiver to see which size you need. All of our mounts come with #6 screws with some exceptions where #8 screws are specified. 

Savage rifles manufactured after the early 2000’s have a receiver with a round front and rear. These will work with our “Round Back Mounts”. Savage rifles manufactured prior to the early 2000’s have a receiver with a round front and a flat rear. We call these our “Flat Back Mounts”. 

Round back (receiver) actions have two action lengths. Short or Long action. Previously, a 110, 112, 114, 116 series rifle denoted a long action and a 10, 12, 14, 16 denoted a short action. Savage has since changed their numbering system. We recommend measuring your center spread if you aren’t 100% sure which action length you have. 

F-CLASS EXTENDED RAILS: These are available in two variants, choose the “with Ejection Port” version for repeaters. The “Single Load” version does not have an ejection port cut into the rail. 

80350: This mount only fits guns that are factory drilled and tapped or have been previously drilled and tapped to the 1 piece Leupold/Redfield pattern in the correct location

 

*The center spread is the distance between the two middle holes, center to center, on your receiver.

 

Available for the following:

 #80300: Savage Round Back Short Action – HD – 0 MOA – Black (Center Spread: 3.93″)

#80302: Savage Round Back Short Action – HD – 20 MOA – Black (Center Spread: 3.93″)

#80303: Savage Round Back Short Action – HD – 30 MOA – Black (Center Spread: 3.93″)

#80304: Savage Round Back Short Action – HD – 40 MOA – Black (Center Spread: 3.93″)

#80310: Savage Round Back Short Action with Ejection Port (Extended F-Class Rail) – HD – 0 MOA – Black (Center Spread: 3.93″)

#80320: Savage Round Back Short Action Single Load (Extended F-Class Rail) – HD – 0 MOA – Black (Center Spread: 3.93″)

#80322: Savage Round Back Short Action Single Load (Extended F-Class Rail) – HD – 20 MOA – Black (Center Spread: 3.93″)

#80330: Savage Round Back Long Action – HD – 0 MOA – Black (Center Spread: 4.63″)

#80332: Savage Round Back Long Action – HD – 20 MOA – Black (Center Spread: 4.63″)

#80333: Savage Round Back Long Action – HD – 30 MOA – Black (Center Spread: 4.63″)

#80334: Savage Round Back Long Action – HD – 40 MOA – Black (Center Spread: 4.63″)

#80335: Savage Flat Back Long Action – HD – 0 MOA – Black (Center Spread: 4.63″)

#80336: Savage Flat Back Long Action – HD – 20 MOA – Black (Center Spread: 4.63″)

#80350: Savage Model 99  – HD – 0 MOA – Black (Center Spread: 3.76″)

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.