EGW Lightweight Tactical Picatinny Scope Mount Rail Base – Browning

To fit Browning firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

• This mount is available with a 0 or 20 MOA (for most models)
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
• Made in the USA
• 6061 T6 Aircraft Grade Aluminium
• Most models available in Silver (SIL) or Black (BLK). Black models are Type 2 Anodized

Installation: EGW recommends 20 inch lbs of torque and a drop of blue loctite

NOTE: If you prefer to buy Australian Made, we also manufacture our own scope rails for the Browning BLR Short Action. Available at the following link: https://australiantacticalprecision.com.au/product/optics/scope-bases-and-rails/atp-picatinny-scope-mount-rail-base-browning-blr-short-action-australian-made/

 

Notes:

ALL RAILS: There have been issues with Browning firearms being chambered for a certain action length and having a different length action. Eg: X-Bolt 22-250 in a WSSM action. Please make sure the scope mount you are selecting has the correct centre spread before purchasing. Browning calls their WSSM guns SSA.

A-BOLT RAILS: A-Bolt rails will not fit the Mountain Titanium in 300 WSM

BAR/BLR LONG ACTION RAIL: The This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.

BLR SHORT ACTION RAILS: This will also work with the BLR Takedown rifle. We have found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.

Available for the following:

*The center spread is the distance between the two middle holes, center to center, on your receiver.

#43000: Browning A-Bolt Short Action – 0 MOA – Black (Center Spread: 3.125″)

#43002: Browning A-Bolt Short Action – 20 MOA – Black (Center Spread: 3.125″)

#43100: Browning A-Bolt Long Action (will NOT fit AB3) – 0 MOA – Black (Center Spread: 3.86″)

#43102: Browning A-Bolt Long Action (will NOT fit AB3) – 20 MOA – Black (Center Spread: 3.86″)

#43110: Browning A-Bolt Long Action (will NOT fit AB3) – 0 MOA – Silver (Center Spread: 3.86″)

#43200: Browning A-Bolt 12ga Shotgun – 0 MOA – Black (Center Spread: 3.86″)

#43300: Browning A-Bolt WSSM Action – 0 MOA – Black (Center Spread: 3.018″)

#43302: Browning A-Bolt WSSM Action – 20 MOA – Black (Center Spread: 3.018″)

#43330: Browning T-Bolt – 0 MOA – Black (Center Spread: 2.868″)

#43332: Browning T-Bolt – 20 MOA – Black (Center Spread: 2.868″)

#43400: Browning AB3 Long Action – 0 MOA – Black (Center Spread: 3.862″)

#43402: Browning AB3 Long Action – 20 MOA – Black (Center Spread: 3.862″)

#43403: Browning AB3 Short Action – 0 MOA – Black (Center Spread: 3.25″)

#43404: Browning AB3 Short Action – 20 MOA – Black (Center Spread: 3.25″)

#43500: Browning BAR, BLR Long Action – 0 MOA – Black (Center Spread: 3.19″)

#43501: Browning BAR, BLR Long Action – 0 MOA – Silver (Center Spread: 3.19″)

#43502: Browning BAR, BLR Long Action – 20 MOA – Black (Center Spread: 3.19″)

#43600: Browning Lever Action BLR Short Action – 0 MOA – Black (Center Spread: 2.8″)

#43602: Browning Lever Action BLR Short Action – 20 MOA – Black (Center Spread: 2.8″)

#43800: Browning BBR Long Action – Black

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.