EGW Lightweight Tactical Picatinny Scope Mount Rail Base – Tikka / Sako

To fit Sako and Tikka firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

• This mount is available with a 0 or 20 MOA (for most models)
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
• Made in the USA
• 6061 T6 Aircraft Grade Aluminium
• Most models available in Silver (SIL) or Black (BLK). Black models are Type 2 Anodized

Installation: EGW recommends 20 inch lbs of torque and a drop of blue loctite

NOTE: If you prefer to buy Australian Made, we also manufacture our own scope rails for the Tikka T1x, Tikka M55 and Tikka T3/T3x. Available at the following link: https://australiantacticalprecision.com.au/shop/optics/scope-bases-and-rails/?filtering=1&filter_product_brand=1705

 

Notes:

SAKO TRG, M995 RAILS: These are not dovetail scope mounts. Your gun must be drilled and tapped for this scope mount to work. This scope mount comes with Hex Head Metric 3.5 X .6 screws.

TIKKA T3 RAILS: Tikka T3 rifles made after 2003 use 6-48 screws. Guns before 2003 use 3.5 x .5 metric screws. We only provide the 6-48 screw variant.

Modification to the front of the mount is required to fit the Tikka T3X Tac A1. The mount must be cut down to fit behind the stock front end. This mount is not the same height as the front end.

Available for the following:

*The center spread is the distance between the two middle holes, center to center, on your receiver.

#44000: Tikka T3 and T3X Rifle variants. (provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled and tapped for 6-48 screws) – 0 MOA – Black (Center Spread: 3.245″)

#44001: Tikka T3 and T3X Rifle variants. (provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled and tapped for 6-48 screws) – 0 MOA – Silver (Center Spread: 3.245″)

#44002: Tikka T3 and T3X Rifle variants. (provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled and tapped for 6-48 screws) – 20 MOA – Black (Center Spread: 3.245″)

#44003: Tikka T3 and T3X Rifle variants. (provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled and tapped for 6-48 screws) – 20 MOA – Silver (Center Spread: 3.245″)

#44020: Tikka 595 – 0 MOA – Black (Center Spread: 3.865″)

#44022: Tikka 595 – 20 MOA – Black (Center Spread: 3.865″)

#44040: Tikka 695 – 0 MOA – Black (Center Spread: 4.035″)

#44042: Tikka 695 – 20 MOA – Black (Center Spread: 4.035″)

#44100: Sako TRG, M995 – 0 MOA – Black (Center Spread: 2.574″)

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.