MDT Long Top Picatinny Scope Mount Base Rail System with Integrated Recoil Lug

MDT’s Picatinny Long Top Rail systems are specifically designed to make the mounting of your optics and night vision (NV), lighting or infrared (IR) accessories easier.

They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. The rails are profiled to allow the back section of the rail to be mounted flush on the receiver while the front section of the rail is free-floating over the barrel. Both rear and front top rail sections are machined in parallel planes and the front section of the rail sits lower to accommodate installation of optics with larger objectives.

These rails are designed with a 20 MOA incline providing additional elevation adjustment from your scope*.

A recoil lug has been integrated in the underside rail profile on models where the action’s design allows for this feature.

* Additional elevation adjustment will vary based on your scope specifications.

SPECIFICATIONS

• CNC machined from 6061-T6 aircraft grade aluminum
• Mil-Spec Type III hard anodized
• 20 MOA rail
• Compatible with larger objective optics
• Free-Floating profile over barrel
• Short Action (SA) and Long Action (LA) options
• Hardware included:
  • #6/48 TORX screws in ⅜” length
  • #8/40 TORX screws in ⅜’ length (on Savage models only)

NOTES

Savage rifles manufactured after the early 2000’s have a receiver with a round front and rear (Round Back) which will fit these rails. Savage rifles manufactured prior to the early 2000’s have a receiver with a round front and a flat rear (Flat Back). MDT rails will not fit Flat Back rifles.

Available for:

Savage Short Action SA (Round Back), 20 MOA – Black

Savage Long Action LA (Round Back) 20 MOA – Black

ATP is an authorised Australian dealer for MDT. All MDT products bought from ATP are covered by the Australian MDT Warranty.