Spuhr Hunting Series One Piece Unimount Scope Mount / Rings, Aesthetic – SCT Sako TRG/Tikka T3X

Hunting Series One Piece Scope Mount

SCT Sako TRG/Tikka T3x

The Spuhr hunting series mount is machined from one-piece solid billet, in 7075 T651 Aluminum with no joints which can over time become a weakness in a mount.

The SCT series is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42. The aesthetic version features two classic rings without interfaces for a more traditional look.

45 degree split rings gives clear visibility of the turrets with minimal movement. 10-degree wedge included.

Made in Sweden

Note: For rifles with TRG/Tikka T3 / T3x dovetail – NOT for Picatinny rail or SAKO TRG-S

Features

Durability

Prevents damage on scope due to flexing during heavy recoil or rough environment.  Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together of small parts.

Accessible and readable dials

The rings are cut 45 degrees instead of horizontal as usual, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs.

Available variants:

Heights are measured from the centre of the scope tube to the top of the picatinny rail.

• SCT-3001A, 30mm Tube, 1.18″ Height,  0 MIL/0 MOA
• SCT-3006A, 30mm Tube, 1.35″ Height,  0 MIL/0 MOA
• SCT-4006A, 34mm Tube, 1.35″ Height,  0 MIL/0 MOA
• SCT-6006A, 36mm Tube, 1.35″ Height,  0 MIL/0 MOA

ATP is an authorised Australian dealer for Spuhr. All Spuhr products bought from ATP are covered by the Australian Spuhr Warranty.